Language

PRODUCTS

PRODUCT

Home

All-in-one 2.4G active RFID reader VI-S710

The integrated 2.4G active RFID reader is a 2.4G active RFID reader with integrated antenna and reader. It uses the 2.4GHz ISM frequency band and wireless communication technology to collect the identification information of the target tag to realize data collection. It can be widely used in the positioning of personnel and assets and the collection of wireless sensor data.

LEARN MORE

2.4G Active RFID Fixed Reader VF-S721

(1)Adopt 2.4G ISM free channel, read distance> 100 meters, special tags up to kilometers； (2)VF-S721 is a high-performance active RFID reader with long reading distance, high recognition accuracy and strong anti-collision ability； (3)Widely applied in vehicle management, intelligent transportation, electric vehicle anti-theft system, safe campus, asset management, warehousing, logistics management, etc.

LEARN MORE

Ceiling mounted integrated type 2.4G active RFID reader VI-S710XD

The ceiling-mounted integrated 2.4G active RFID reader is a product that integrates antenna and reader. It mainly uses the 2.4GHz ISM frequency band and adopts wireless communication technology to collect identification information of target tags to achieve data collection. It can be widely used in the positioning of personnel and assets and the collection of wireless sensor data. It is mainly used inside buildings, with beautiful appearance and flexible and convenient installation.

LEARN MORE

125K+2.4G Active RFID anti-tamper search Tag with LED display (Dual-band) VT-S3005

VT-S3005 dual-frequency active RFID tag is a battery-powered active RFID electronic tag. The tag has two working frequency bands, 125KHz frequency band and 2.4GHz frequency band. The tag has an anti-tamper alarm switch and flashing LED function. (1) The 2.4GHz frequency band is the main working frequency band, which is used for the communication between tags and readers; (2) The 125KHz frequency band is used to wake up and trigger tags in the dormant state and receive the ID of the exciter; (3) The working mode of the tag is TTF (tag active sending).

LEARN MORE

125K+13.56MHz+2.4G Active RFID Tag (Tri-band ）VT-GL3001

VT-GL3001 tag has three radio frequency bands. The UHF (2.4GHz) frequency ID and HF (13.56MHz) frequency of the tag share the same ID, which improves the unity of the system. (1)LF frequency（125KHz）is used to wake up the tag and transmit location information to the tag； (2)UHF frequency（2.4GHz）is used to remotely transmit tag information to the reader； (3)HF frequency（13.56MHz）can be used in attendance and access control fields.

LEARN MORE

2.4G Active RFID Tag（Single band）VT-S3001

2.4G active RFID tag is actively transmitted, sending a fixed ID number within a certain interval; widely used in vehicle management, intelligent transportation, electric vehicle anti-theft systems, safe campus, asset management, warehousing, logistics management, etc.

LEARN MORE

2.4G active Dual-band wristband tag VT-S3002

2.4G active excitation tag is an active RFID beacon; the tag has two RF bands: -LF frequency (125KHz) is used to wake up the tag and transmit location ID information to the tag; -Active microwave (2.4GHz) frequency is used to remotely transmit tag information to the reader.

LEARN MORE

Dual-band active asset tag VT-S4040

VT-S4040 dual-frequency active asset tag is a battery-powered active RFID beacon; there are two working frequencies: 1. 2.4GHz band is used as the main channel of the asset tag to complete long-distance communication; 2. 125KHz channel is used as the asset tag trigger channel to complete asset tag wake-up and digital map coordinate transmission; 3. The asset tag working mode is TTF (Tag Talking First). It is an active RFID beacon product that actively sends informatio.

LEARN MORE

Outdoor low frequency exciter VGL-125IP65

The VGL-125IP65 low-frequency exciter is a 125KHz low-frequency excitation signal generator. It, together with the 2.4GHz active excitation tag and the 2.4GHz active card reader, forms a 2.4GHz active radio frequency identification system with excitation function.

LEARN MORE

125K LF exciter VGL-125

The low-frequency exciter does not require any other configuration. After power-on, it transmits address information by sending a 125K low-frequency excitation signal. By combining it with a 2.4G active excitation tag, the point positioning function can be achieved.

LEARN MORE

VI-2I01C 2.4G Directional Card

Employing advanced anti-collision algorithms and a high-performance processor, the card reader can simultaneously read over 200 tags, ensuring complete and accurate identification within a very short time. It comes standard with a powerful 10/100M network module, enabling operation in any complex network environment. With optional PoE, Wi-Fi, 3G, and Bluetooth modules, the reader supports PoE power supply, Wi-Fi wireless data transmission, 3G wireless data transmission, and Bluetooth wireless data transmission. The integrated controller allows it to output control signals automatically even without a dedicated WG controller.

LEARN MORE

VI-2I04C 2.4G Ceiling-Mounted Directional Card Reader

Employing a unique multi-array antenna design, the forward angle is controlled within 70° vertically and 70° horizontally, while also exhibiting excellent back-side card reading suppression performance. Using advanced anti-collision algorithms and a high-performance processor, the reader can simultaneously read over 200 tags, ensuring complete and error-free identification within a very short time. The reader comes standard with a powerful 10/100M network module, enabling it to operate in any complex network environment.

LEARN MORE

VI-2450 (FSBJ) Important Asset Tear-Proof Alarm Card

The VI-2450(FSBJ) 2.4G Important Asset Tear-Proof Alarm Card is an active 2.4G tear-proof tag independently developed by our company. This active electronic tag provides both location tracking and tear-proof alarm functions, boasts a battery life of 2-3 years, and features easily replaceable batteries. Primarily used for managing important assets or classified materials, the card is attached to the asset or material using 3M adhesive. If the card is intentionally ripped off, it will emit an alarm sound and display an alarm card number. When someone carries an important asset or classified material with this tag into a pre-positioned 2.4G monitoring area, the card will periodically emit a 2.4G alarm card number. Management personnel can then promptly address the issue upon seeing the 2.4G alarm card number on the host computer.

LEARN MORE

< 1 >