UHF RFID Speed Bump Sensing Reader VI-5035-X

Structural design: Constructed of 1060 aluminum, providing excellent heat dissipation and easy maintenance;
Adding a vent valve balances the internal and external air pressure difference, prevents internal moisture, and extends the service life of the main unit;
The cable sleeve is made of 304 stainless steel, with a waterproof silicone ring and double-layer internal potting for protection;
UHF RFID module: Employs Impinj's high-performance E710 dedicated UHF RFID chip, supporting Impinj Gen2X to further enhance the RFID reader's performance in terms of reading speed, distance, and accuracy; TI ARM embedded processing chip enables high-speed reading and rapid data processing;
Applicable Tags: Fully supports electronic tags compliant with EPCglobal UHF Class 1 Gen 2 / ISO 18000-6C standards;
Operating frequency band: 865-868MHz, 902-928MHz (can be adjusted according to the requirements of different countries or regions);
Protocol support: Supports Wanquan VUP, Modbus, TCP/UDP, MQTT and other protocols;
Communication methods: Supports 100Mbps Ethernet (POE), WiFi/4G (optional), supports RS232/S485 communication, and supports Wiegand communication;
Communication interface (GPIO logic control): 4 outputs supporting DC24V/2A, AC124V/2A), 2 inputs;
Antenna interface: Supports 4 or 8 external SMA antenna interfaces;
Power supply method:

Method 1, supports wide voltage 9V-24DCDC (3A) power supply;

Method 2: PoE power supply can also be used (supports 100Mbps 1236 line sequence power supply).

Power range: Output power is adjustable from 0 to 33 dBm.
Read/Disk Mode: Supports continuous (automatic), command, and trigger-based working modes; Data Reporting Mode: Cache, scheduled, and real-time modes.
Upgrade methods: 1. Offline upgrade: Supports RS232;

2. Online upgrade: TCP upgrade method: both 100 Mbps Ethernet and 2.4 GHz WiFi are supported (WiFi optional);

Protection: All communication interfaces are isolated and protected; some critical communication interfaces are protected against lightning and static electricity.

Temperature protection: Temperature compensation function is supported in extremely cold regions (optional)

FEATURES

SPECIFICATIONS

Purchase code (product model)	VI-5035-X
Performance parameters
RF core chip	Impinja VM-64/68 E710 dedicated RF chip module
Air interface protocol	EPC Global UHF class1 Gen2/ISO 18000-6C/ISO 18000-6B
Operating frequency	902-928MHz or 865-868MHz
Output power	33dBm±1dBm
Output power adjustment	1dBm increments (configurable via VANCH software)
Receiver sensitivity	<85dBm
Tag recognition peak speed	>950 times/second
VA-5035-X Speed Bump RFID Antenna	11±1dBi circular polarization
Antenna identifies distance and height before and after.	Front and rear recognition range 1-3m, height 1.5-2m (depending on tag size and reader power settings).
RSSI tag	support
Antenna connection protection	support
Supported regions	The United States, Canada, and other regions that comply with U.S. FCC Part 15 regulations. Europe and other regions that comply with ETSI EN 302 308 standards China, India, Japan, South Korea, Malaysia, Taiwan
Number of antennas	4 or 8 external SMA antenna interfaces
Communication interface	RJ45 , RS232, RS485, Wiegand 26/34 interfaces
Communication Protocol	ModbusTCP, ModbusRTU protocol, TCP/UDP
PoE (Power over Ethernet) communication (optional)	24W PoE power supply (only supports 100Mbps 1236 pin sequence power supply)
4G Cat.1 communication (optional)	Download speed 10Mbps, upload speed 5Mbps
WiFi (optional)	Supports IEEE 802.11 n/b/g
Heating device (optional)	Low-temperature automatic heating (minus 5°C) is optional (to be determined based on the project site environment).
Communication rate	Serial port speeds range from 9600 to 115200 bps, while RJ45 speeds are 10 Mbps.
Reliable firmware upgrades	Scalable upgrade mechanism
General Purpose Input/Output (GPIO)	2 inputs, 4 outputs
Application Software Interface	Provides API development kits and example programs for VC, VB, and Java applications.
Testing software	VANCH VUP v1.0
Mechanical and electrical performance
size	400035045mm (A single shell is 0.5m long, and can be spliced together to reach 1/2/3/4/5/6/7/8m)
power supply	Power converter with 220V AC input and +12V/3A DC output
RF output interface	SMA type connector
Power consumption	Maximum power 3W, maximum starting current 1A
weight	A single antenna weighs approximately 3.3 kg.
humidity	5% to 95%, non-condensing
Protection level	IEC IP 67
Operating temperature	-40ºC to + 80ºC
Storage temperature	-40°C to 85 ° C
Reader compliance certification	FCC certification, CE certification

PACKING LIST

DOWNLOAD

VI-5035-X UHF RFID Speed Bump Sensing Reader(ENG).pdf

ENQUIRY

If you have any good suggestions and comments on our company, or want to consult our products, please fill in the form below, and we will contact you at the first time!