UHF RFID reader module VM-64BT

（1）The radio frequency is based on the domestic Zhikun IBAT2000 dedicated UHF RFID chip design;
（2）Fully supports ISO-18000-6C (EPC G2) protocol standards;
（3）Working frequency 865-868MHZ, 902-928MHZ (can be adjusted according to the requirements of different countries or regions);
（4）The serial port-based command system is concise, efficient, convenient and fast to integrate.

Enquiry

Datasheet

FEATURES

SPECIFICATIONS

Physical parameters:
Length (PCB length) mm			55.5 mm
Length (Including the RF connector) mm			55.5 mm
Width mm			39.5 mm
Height mm			7.5 mm
Operating Temp.			-20°C – +60 °C
Storage Temp.			-20°C – +85 °C
Operating Humidity			< 95% ( + 25 °C)
Antenna connector
MMCX connector			50 Ohm
SMA connector			50 Ohm		option
Electrical parameters
		minimum		typical		Maximum
Protocol		EPC global UHF Class 1 Gen 2 / ISO 18000-6C
Frequency		860MHz				960MHz
Voltage		3.7V		4.2V		5V
Operating Current (30dBm output)		1.1A		1.2A		1.3A
Standby current		50mA		60mA		70mA
Maximum output power				31.5 dBm
Minimum output power				20 dBm
Output power accuracy				+/-1DB
Output power flatness				+/-0.2DB
Antenna connector protection				Support
Tag RSSI				Support
Antenna impedance matching measurement				Support
Dense reader mode (DRM)				Support
Ambient temperature measurements				Support
ESD protection				Multiple
Connector PIN definition：
Connector Model：Molex 53261-1571
PIN	Definition		Description
1	GND		Grounding at the same time
2	GND
3	DC4.5V`DC5.5V		Connect to power at the same time
4	DC4.5V`DC5.5V
5	GPIO 1		Universal IO interface
6	GPIO 2		Universal IO interface
7	GPIO 3		Universal IO interface
8	Buzzer		driven
9	UART_RXD		TTL Level
10	UART_TXD		TTL Level
11	SWDIO		USB interface
12	SWCLK		Universa IO interface
13	GPIO 4		High TTL Level enabled module
14	EN		Universal IO interface
15	GPIO 5		driven

PACKING LIST

DOWNLOAD

VM-64BT 1ports UHF RFID reader module(1).pdf

ENQUIRY

If you have any good suggestions and comments on our company, or want to consult our products, please fill in the form below, and we will contact you at the first time!