UHF RFID Fixed Industrial Reader VF-747P/787P

1. Structural Design: The casing is made of high-strength die-cast aluminum with a patented design, ensuring robustness and durability to meet the demands of harsh working environments;
2. UHF RFID Module: Employs Impinj's high-performance E710 dedicated UHF RFID chip, supporting Impinj Gen2X to further enhance the RFID reader's performance in terms of reading speed, distance, and accuracy; a TI ARM embedded processing chip enables high-speed reading and rapid data processing;
3. Applicable Tags: Fully supports EPCglobal UHF Class 1 Gen 2 / ISO compliant tags. 18000-6C/standard electronic tag;
4. Operating frequency band: 865-868MHz, 902-928MHz (adjustable according to different country or region requirements);
5. Protocol support: Supports Vanch VUP protocol, Modbus TCP, Modbus RTU protocol, TCP/UDP protocol, MQTT protocol;
6. Communication methods: Supports 100Mbps Ethernet (POE), WiFi/4G (optional), supports RS232/RS485 communication, supports Wiegand communication;
7. Communication interface (GPIO logic control): 4-channel output Supports DC24V/2A, AC124V/2A), 2-channel input;
8. Antenna Interface: Supports 4 or 8 external SMA antenna interfaces.

Enquiry

Datasheet

FEATURES

SPECIFICATIONS

Purchase code (product model)	VF-747P/787P
Performance parameters
RF Core Chip	Impinj VM-64/68 E710 Dedicated RF Chip Module (USA)
Air Interface Protocol	EPC Global UHF class1 Gen2/ISO 18000-6C/ISO 18000-6B
Operating Frequency	902-928MHz or 865-868MHz
Output Power	33dBm±1dBm
Output Power Adjustment	1dBm increments (configurable via VANCH software)
Receiver Sensitivity	<-85dBm
Tag Identification Peak Speed	>950 Hz
VA-Q993 (Far-Field Antenna)	13-33dBm: Distance 0.5-15m (depending on reader configuration, antenna gain, and tag type)
VA-9595N (Near-Field Antenna)	13-33dBm: Distance 10-50cm (depending on reader configuration, antenna gain, and tag type)
Write Distance (VA-Q993 Far-Field Antenna)	0-10 meters (depending on reader configuration, antenna gain, and tag type)
Tag RSSI	Support
Antenna connection protection	Support
Support regions	The United States, Canada, and other regions compliant with US FCC Part 15; Europe and other regions compliant with ETSI EN 302 308; China, India, Japan, South Korea, Malaysia, and Taiwan.
Number of Antennas	4 or 8 external SMA antenna interfaces
Communication Interfaces	RJ45, RS232, RS485, Wiegand 26/34 interfaces
Communication Protocols	Modbus TCP, Modbus RTU protocols, TCP/UDP
PoE Powered Communication (Optional)	24W PoE power supply (supports 100Mbps 1236 pin sequence power supply only)
4G Cat.1 Communication (Optional)	Downlink speed 10Mbps, uplink speed 5Mbps
WiFi (Optional)	Supports IEEE 802.11 n/b/g
Heating Device (Optional)	Optional low-temperature automatic heating (down to -5ºC) (determined based on project site environment)
Communication Rate	Serial port speed 9600～115200bps, RJ45 10Mbps
Operating Status	LED indicators, buzzer
Reliable Firmware Upgrades	Scalable upgrade mechanism
General Purpose Input/Output (GPIO)	2 inputs, 4 outputs
Application Software Interface	API development kit and VC, VB, Java application examples provided
Test Software	VANCH VUPv1.0
Mechanical and electrical properties
Dimensions	138 (L) * 138 (W) * 38 (H) mm
Power Supply	Power converter with 220V AC input and +12V/3A DC output
RF Output Interface	SMA connector
Power Consumption	Maximum power 3W, maximum starting current 1A
Weight	Approx. 1.32kg
Humidity	5% to 95%, non-condensing
Protection Rating	IEC IP51
Operating Temperature	-20 ºC to +60 ºC
Storage Temperature	-40°C to 85°C
Compliance Certifications	FCC certified, CE certified

PACKING LIST

DOWNLOAD

VF-747P&787P(ENG).pdf

ENQUIRY

If you have any good suggestions and comments on our company, or want to consult our products, please fill in the form below, and we will contact you at the first time!