HF RFID Gate Reader VC-HF903

High-frequency security gates utilize three-dimensional sensing radio frequency technology, enabling rapid and batch detection of RFID electronic tags in any direction within the sensing area. They are primarily used in libraries, archives, and other settings for access control and theft prevention, serving both batch identification and alarm functions.

This high-frequency security gate supports electronic tags from multiple manufacturers that comply with ISO/IEC 15693 and ISO 18000-3 standards. It supports both active and passive (triggered) alarm modes. The antenna board uses a 20.0mm thick transparent acrylic design, featuring a simple and elegant appearance, stable performance, and reliable quality. It supports group tag reading, with both long-distance and normal reading modes. A 4.3-inch display shows the number of people entering and exiting. It integrates audible and visual alarms, supporting AFI, EAS, DSFID, AFI+EAS, and DSFID+EAS alarm modes. The device supports network communication.

The high-frequency security gate supports non-cascading installation; security gate channels can be cascaded and used side-by-side at the same entrance/exit. The maximum channel recognition distance is 0-140cm, with a recommended channel width of 90-120cm. The security gate installation location must be in an environment with network coverage and free from rain and dust (this product is not waterproof).

FEATURES

SPECIFICATIONS

Purchase code (product model)	VC-HF903
Performance parameters
Operating frequency	13.56Mhz
Card reading protocol	ISO 15693 and ISO 18000-3
Alarm mode	AFI、EAS、DSFID、AFI+EAS、DSFID+EAS
Sensing technology	3D sensing
Noise detection	Support
Tag recognition speed	>65 times/second
Relay	Integrates 8-channel relay linkage output
Display function	A 4.3-inch high-definition display screen can show date, time, pedestrian traffic, customized company logo, alarm information, number of security doors, alarm mode, IP address, dynamic UI, and temperature and humidity (optional).
Alarm light display mode	1. Breathing light (can be turned on or off); 2. Alarm light
Alarm light	Choose one of the seven colors (full color, red, white, yellow, green, cyan, blue, purple).
Alarm notification device	1. Voice input, 2. Buzzer (choose one)
Passive alarm	Support
Personnel flow statistics	Using two sets of infrared cutting sensor technology, it is possible to realize the counting of people entering and exiting.
Physical parameters
Dimensions (L x W x H)	570x120x1615mm
Weight	28kg/piece
Casing Material	Aluminum alloy, acrylic, sheet metal
Appearance	White and transparent acrylic
Waterproofing	Not supported
Channel Width	Recommended height: 80~120cm
RF Power	1~8W
Communication Interface	Network port
Installation Method	With base, use 4-M8 screws; without base, drill holes for installation, use 4-M8 expansion bolts.
Power parameters
Power input	AC 100～240V；50～60Hz
Maximum power consumption	30W (rated power 20W)
Environmental parameters
Operating temperature	-20℃～+60℃
Storage temperature	-40℃～+85℃
Relative humidity	5%–80% RH, non-condensing

PACKING LIST

DOWNLOAD

VC-HF903(ENG).pdf

ENQUIRY

If you have any good suggestions and comments on our company, or want to consult our products, please fill in the form below, and we will contact you at the first time!