Positioning base station VF-BL100

RJ45 * 2: Includes PoE IN and PoE OUT interfaces for power supply and data transmission. It can be connected to a standard PoE switch via network cable or cascaded with similar dual-port base stations from our company.
DC interface: Power supply voltage compatibility with PSE power supply
Reset Hole: Restores default settings. Press and hold for 3 seconds. The base station's green light will flash rapidly for 5 seconds, indicating that the base station has successfully restored its initial settings and restarted.

Installation instructions :

* Please ensure the mounting location can withstand a weight of 2kg or more before installation.

As shown in the diagram above, use KA4 screws to secure the disc holder to the flat top (in the direction indicated by the arrow).
Align the mounting bracket with the latches and push the base station into the mounting bracket slots. The network port direction marked on the bracket latch should be consistent with the network port direction marked on the back of the base station.
Connect the upstream network cable to the base station's RJ45 interface (PoE IN).
If there are cascaded base stations, connect the RJ45 interface (PoE OUT) of the first base station to the RJ45 interface (PoE IN) of the second base station using a network cable. It is recommended that the number of cascaded base stations not exceed 8 levels.

Indicator light signal rules :

After the base station is correctly installed and cascaded with the PoE switch, the base station will start automatically. The operating status of the base station can be determined by indicator lights after startup.
The signal rules for LED indicator lights are shown in the table below.

Lights on	Base station status
The green light flashes rapidly for 5 seconds.	Base station startup / Reset button (long press and hold) to restart
Red light flashing	Obtaining IP address
Green light flashing slowly	IP address obtained successfully
Green light always on	Successfully connected to the positioning engine
If the red light remains on for 30 seconds, the base station will automatically reset.	Local base station malfunction/no connection
The traffic lights flash slowly alternately.	Cascaded lower-level base station failure
The lights are dim	No power connection

The signal rules for the RJ45 interface indicator lights are shown in the table below.

Lights on	Base station status
Chang Liang	The interface has a network connection.
blinking	The interface has data transmission capabilities.
The lights are dim	No network connection

Precautions :

When selecting PoE power supply for a positioning base station, it must be powered by a specified standard PoE power supply device (PSE device conforming to the IEEE 802.3af / 802.3at protocol).
The base station operates in an environment with temperatures ranging from -20℃ to 60℃ and humidity from 0% to 95%. It can be installed outdoors, has an IP66 enclosure protection rating, and should be kept away from fire and strong electromagnetic interference sources.

FEATURES

SPECIFICATIONS

Purchase code (product model)	VF-BL100
Performance parameters
size	180.7x180.7x39.36 mm
Operating frequency band	2.401GHz – 2.481GHz
Operating temperature	-20℃ ~ 60℃
Power consumption	<2W
Installation height	≤ 10m
Power supply method	Standard PoE (IEEE 802.3af/at) / DC power supply 12-30V 1A
packing list
VF-BL100	x 1
Installation tray	x 1
Certificate of Conformity	x 1
Mounting screws KA4*30 and rubber plugs	(1 screw + 1 rubber stopper) × 4
Waterproof interface 4-piece set	x 2

PACKING LIST

DOWNLOAD

VF-BL100 定位基站 (CHN).pdf

ENQUIRY

If you have any good suggestions and comments on our company, or want to consult our products, please fill in the form below, and we will contact you at the first time!